Attachment 'dmesg_2.6.25.txt'
Download 1 [ 0.000000] Initializing cgroup subsys cpuset
2 [ 0.000000] Linux version 2.6.25-2-686 (Debian 2.6.25-6) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jun 27 03:23:20 UTC 2008
3 [ 0.000000] BIOS-provided physical RAM map:
4 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
5 [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
6 [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
7 [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5b2000 (usable)
8 [ 0.000000] BIOS-e820: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
9 [ 0.000000] BIOS-e820: 000000003f5d5000 - 000000003f5e6000 (reserved)
10 [ 0.000000] BIOS-e820: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
11 [ 0.000000] BIOS-e820: 000000003f5e9000 - 000000003f605000 (reserved)
12 [ 0.000000] BIOS-e820: 000000003f605000 - 000000003f606000 (ACPI NVS)
13 [ 0.000000] BIOS-e820: 000000003f606000 - 000000003f608000 (reserved)
14 [ 0.000000] BIOS-e820: 000000003f608000 - 000000003f611000 (ACPI data)
15 [ 0.000000] BIOS-e820: 000000003f611000 - 000000003f617000 (ACPI NVS)
16 [ 0.000000] BIOS-e820: 000000003f617000 - 000000003f700000 (reserved)
17 [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
18 [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
19 [ 0.000000] 117MB HIGHMEM available.
20 [ 0.000000] 896MB LOWMEM available.
21 [ 0.000000] Scan SMP from c0000000 for 1024 bytes.
22 [ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
23 [ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
24 [ 0.000000] Scan SMP from c009ec00 for 1024 bytes.
25 [ 0.000000] Entering add_active_range(0, 0, 259506) 0 entries of 256 used
26 [ 0.000000] Zone PFN ranges:
27 [ 0.000000] DMA 0 -> 4096
28 [ 0.000000] Normal 4096 -> 229376
29 [ 0.000000] HighMem 229376 -> 259506
30 [ 0.000000] Movable zone start PFN for each node
31 [ 0.000000] early_node_map[1] active PFN ranges
32 [ 0.000000] 0: 0 -> 259506
33 [ 0.000000] On node 0 totalpages: 259506
34 [ 0.000000] DMA zone: 32 pages used for memmap
35 [ 0.000000] DMA zone: 0 pages reserved
36 [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
37 [ 0.000000] Normal zone: 1760 pages used for memmap
38 [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
39 [ 0.000000] HighMem zone: 235 pages used for memmap
40 [ 0.000000] HighMem zone: 29895 pages, LIFO batch:7
41 [ 0.000000] Movable zone: 0 pages used for memmap
42 [ 0.000000] DMI 2.4 present.
43 [ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 MEDION)
44 [ 0.000000] ACPI: XSDT 3F60FF10, 005C (r1 MEDION MEDIONAG 6222004 MSFT 10013)
45 [ 0.000000] ACPI: FACP 3F5E6C10, 00F4 (r4 MEDION MEDIONAG 6222004 MSFT 10013)
46 [ 0.000000] ACPI: DSDT 3F608010, 52EC (r1 MEDION MEDIONAG 0 INTL 20051117)
47 [ 0.000000] ACPI: FACS 3F611D40, 0040
48 [ 0.000000] ACPI: APIC 3F610E90, 005C (r2 MEDION MEDIONAG 6222004 MSFT 10013)
49 [ 0.000000] ACPI: MCFG 3F615C90, 003C (r1 MEDION MEDIONAG 6222004 MSFT 97)
50 [ 0.000000] ACPI: SLIC 3F612C10, 0176 (r1 MEDION MEDIONAG 6222004 MSFT 97)
51 [ 0.000000] ACPI: SSDT 3F605510, 04CE (r2 PmRef CpuPm 3000 INTL 20051117)
52 [ 0.000000] ACPI: SSDT 3F5E8A10, 0232 (r2 PmRef Cpu0Tst 3000 INTL 20051117)
53 [ 0.000000] ACPI: SSDT 3F611A10, 00A0 (r2 PmRef Cpu1Tst 3000 INTL 20051117)
54 [ 0.000000] ACPI: PM-Timer IO Port: 0x408
55 [ 0.000000] ACPI: Local APIC address 0xfee00000
56 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
57 [ 0.000000] Processor #0 7:12 APIC version 20
58 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
59 [ 0.000000] Processor #1 7:12 APIC version 20
60 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
61 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
62 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
63 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
64 [ 0.000000] ACPI: IRQ0 used by override.
65 [ 0.000000] ACPI: IRQ2 used by override.
66 [ 0.000000] ACPI: IRQ9 used by override.
67 [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
68 [ 0.000000] Using ACPI (MADT) for SMP configuration information
69 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f700000:c0400000)
70 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
71 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
72 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
73 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
74 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257479
75 [ 0.000000] Kernel command line: root=/dev/sda1 ro
76 [ 0.000000] mapped APIC to ffffb000 (fee00000)
77 [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
78 [ 0.000000] Enabling fast FPU save and restore... done.
79 [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
80 [ 0.000000] Initializing CPU#0
81 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
82 [ 0.000000] Detected 1596.077 MHz processor.
83 [ 0.001866] Console: colour VGA+ 80x25
84 [ 0.001876] console [tty0] enabled
85 [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
86 [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
87 [ 0.004000] Memory: 1019640k/1038024k available (1753k kernel code, 17580k reserved, 728k data, 252k init, 120520k highmem)
88 [ 0.004000] virtual kernel memory layout:
89 [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
90 [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
91 [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
92 [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
93 [ 0.004000] .init : 0xc0375000 - 0xc03b4000 ( 252 kB)
94 [ 0.004000] .data : 0xc02b6432 - 0xc036c640 ( 728 kB)
95 [ 0.004000] .text : 0xc0100000 - 0xc02b6432 (1753 kB)
96 [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
97 [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
98 [ 0.004019] spurious 8259A interrupt: IRQ7.
99 [ 0.084021] Calibrating delay using timer specific routine.. 3200.42 BogoMIPS (lpj=6400840)
100 [ 0.084298] Security Framework initialized
101 [ 0.084382] SELinux: Disabled at boot.
102 [ 0.084463] Capability LSM initialized
103 [ 0.084587] Mount-cache hash table entries: 512
104 [ 0.085059] Initializing cgroup subsys ns
105 [ 0.085145] Initializing cgroup subsys cpuacct
106 [ 0.085277] CPU: L1 I cache: 32K, L1 D cache: 24K
107 [ 0.085399] CPU: L2 cache: 512K
108 [ 0.085474] CPU: Physical Processor ID: 0
109 [ 0.085552] Intel machine check architecture supported.
110 [ 0.085636] Intel machine check reporting enabled on CPU#0.
111 [ 0.085718] using mwait in idle threads.
112 [ 0.085799] Compat vDSO mapped to ffffe000.
113 [ 0.085885] Checking 'hlt' instruction... OK.
114 [ 0.103612] ACPI: Core revision 20070126
115 [ 0.123383] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
116 [ 0.123602] Booting processor 1/1 ip 4000
117 [ 0.004000] Initializing CPU#1
118 [ 0.004000] Calibrating delay using timer specific routine.. 3192.28 BogoMIPS (lpj=6384567)
119 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
120 [ 0.004000] CPU: L2 cache: 512K
121 [ 0.004000] CPU: Physical Processor ID: 0
122 [ 0.004000] Intel machine check architecture supported.
123 [ 0.004000] Intel machine check reporting enabled on CPU#1.
124 [ 0.212358] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
125 [ 0.213117] Total of 2 processors activated (6392.70 BogoMIPS).
126 [ 0.213309] ENABLING IO-APIC IRQs
127 [ 0.213632] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
128 [ 0.256016] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
129 [ 0.256046] Brought up 2 CPUs
130 [ 0.256189] CPU0 attaching sched-domain:
131 [ 0.256199] domain 0: span 03
132 [ 0.256207] groups: 01 02
133 [ 0.256219] domain 1: span 03
134 [ 0.256226] groups: 03
135 [ 0.256236] CPU1 attaching sched-domain:
136 [ 0.256244] domain 0: span 03
137 [ 0.256250] groups: 02 01
138 [ 0.256262] domain 1: span 03
139 [ 0.256268] groups: 03
140 [ 0.257113] net_namespace: 548 bytes
141 [ 0.257202] Booting paravirtualized kernel on bare hardware
142 [ 0.258260] NET: Registered protocol family 16
143 [ 0.259093] ACPI: bus type pci registered
144 [ 0.260166] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
145 [ 0.260252] PCI: Not using MMCONFIG.
146 [ 0.344945] PCI: Using configuration type 1
147 [ 0.345036] Setting up standard PCI resources
148 [ 0.358505] ACPI: EC: Look up EC in DSDT
149 [ 0.367794] ACPI: BIOS _OSI(Linux) query ignored
150 [ 0.367884] ACPI: DMI System Vendor: MEDION
151 [ 0.367961] ACPI: DMI Product Name: E1210
152 [ 0.368040] ACPI: DMI Product Version: Ver.001
153 [ 0.368117] ACPI: DMI Board Name: E1210
154 [ 0.368192] ACPI: DMI BIOS Vendor: American Megatrends Inc.
155 [ 0.368272] ACPI: DMI BIOS Date: 06/13/2008
156 [ 0.368348] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
157 [ 0.368433] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
158 [ 0.369091] ACPI: Interpreter enabled
159 [ 0.369170] ACPI: (supports S0 S1 S3 S4 S5)
160 [ 0.369504] ACPI: Using IOAPIC for interrupt routing
161 [ 0.383065] ACPI: EC: non-query interrupt received, switching to interrupt mode
162 [ 0.400097] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
163 [ 0.400189] ACPI: EC: driver started in interrupt mode
164 [ 0.400658] ACPI: PCI Root Bridge [PCI0] (0000:00)
165 [ 0.401806] pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
166 [ 0.401837] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
167 [ 0.401951] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
168 [ 0.402531] PCI: Transparent bridge - 0000:00:1e.0
169 [ 0.402660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
170 [ 0.403264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
171 [ 0.403606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
172 [ 0.441395] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
173 [ 0.442434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
174 [ 0.443456] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
175 [ 0.444492] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
176 [ 0.445526] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
177 [ 0.446647] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
178 [ 0.447769] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
179 [ 0.448916] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
180 [ 0.450190] Linux Plug and Play Support v0.97 (c) Adam Belay
181 [ 0.450410] pnp: PnP ACPI init
182 [ 0.450508] ACPI: bus type pnp registered
183 [ 0.459423] pnp: PnP ACPI: found 11 devices
184 [ 0.459508] ACPI: ACPI bus type pnp unregistered
185 [ 0.459590] PnPBIOS: Disabled by ACPI PNP
186 [ 0.460755] PCI: Using ACPI for IRQ routing
187 [ 0.460843] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
188 [ 0.468214] hpet clockevent registered
189 [ 0.468230] hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
190 [ 0.468480] hpet0: 3 64-bit timers, 14318180 Hz
191 [ 0.469660] ACPI: RTC can wake from S4
192 [ 0.476097] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
193 [ 0.476189] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
194 [ 0.476279] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
195 [ 0.476367] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
196 [ 0.476478] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
197 [ 0.476581] system 00:09: ioport range 0x400-0x47f has been reserved
198 [ 0.476668] system 00:09: ioport range 0x1180-0x119f has been reserved
199 [ 0.476757] system 00:09: ioport range 0x500-0x53f has been reserved
200 [ 0.476844] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
201 [ 0.476937] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
202 [ 0.478192] system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
203 [ 0.478281] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
204 [ 0.478391] system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
205 [ 0.510213] PCI: Bridge: 0000:00:1c.0
206 [ 0.510296] IO window: d000-dfff
207 [ 0.510377] MEM window: 0xdfd00000-0xdfdfffff
208 [ 0.510459] PREFETCH window: 0x00000000ffd00000-0x00000000ffdfffff
209 [ 0.510548] PCI: Bridge: 0000:00:1c.1
210 [ 0.510622] IO window: disabled.
211 [ 0.510701] MEM window: 0xdfc00000-0xdfcfffff
212 [ 0.510780] PREFETCH window: disabled.
213 [ 0.510861] PCI: Bridge: 0000:00:1e.0
214 [ 0.510935] IO window: disabled.
215 [ 0.511012] MEM window: disabled.
216 [ 0.511088] PREFETCH window: disabled.
217 [ 0.511212] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
218 [ 0.511367] PCI: Setting latency timer of device 0000:00:1c.0 to 64
219 [ 0.511404] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
220 [ 0.511557] PCI: Setting latency timer of device 0000:00:1c.1 to 64
221 [ 0.511578] PCI: Setting latency timer of device 0000:00:1e.0 to 64
222 [ 0.511686] NET: Registered protocol family 2
223 [ 0.524271] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
224 [ 0.525229] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
225 [ 0.527093] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
226 [ 0.528089] TCP: Hash tables configured (established 131072 bind 65536)
227 [ 0.528180] TCP reno registered
228 [ 0.532594] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
229 [ 0.972082] Switched to high resolution mode on CPU 0
230 [ 1.193252] it is
231 [ 1.914375] Freeing initrd memory: 5446k freed
232 [ 1.665152] audit: initializing netlink socket (disabled)
233 [ 1.665276] type=2000 audit(1215463330.916:1): initialized
234 [ 1.665828] highmem bounce pool size: 64 pages
235 [ 1.665918] Total HugeTLB memory allocated, 0
236 [ 1.666349] VFS: Disk quotas dquot_6.5.1
237 [ 1.666527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
238 [ 1.666916] io scheduler noop registered
239 [ 1.666997] io scheduler anticipatory registered
240 [ 1.667076] io scheduler deadline registered
241 [ 1.667210] io scheduler cfq registered (default)
242 [ 1.667314] pci 0000:00:02.0: Boot video device
243 [ 1.667839] PCI: Setting latency timer of device 0000:00:1c.0 to 64
244 [ 1.667892] assign_interrupt_mode Found MSI capability
245 [ 1.668028] Allocate Port Service[0000:00:1c.0:pcie00]
246 [ 1.668195] Allocate Port Service[0000:00:1c.0:pcie02]
247 [ 1.668453] PCI: Setting latency timer of device 0000:00:1c.1 to 64
248 [ 1.668504] assign_interrupt_mode Found MSI capability
249 [ 1.668635] Allocate Port Service[0000:00:1c.1:pcie00]
250 [ 1.668793] Allocate Port Service[0000:00:1c.1:pcie02]
251 [ 1.670012] isapnp: Scanning for PnP cards...
252 [ 2.023538] isapnp: No Plug & Play device found
253 [ 2.035321] hpet_resources: 0xfed03000 is busy
254 [ 2.035495] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
255 [ 2.040388] brd: module loaded
256 [ 2.040814] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
257 [ 2.307158] serio: i8042 KBD port at 0x60,0x64 irq 1
258 [ 2.307251] serio: i8042 AUX port at 0x60,0x64 irq 12
259 [ 2.308589] mice: PS/2 mouse device common for all mice
260 [ 2.308833] cpuidle: using governor ladder
261 [ 2.308924] cpuidle: using governor menu
262 [ 2.310672] TCP cubic registered
263 [ 2.310785] NET: Registered protocol family 1
264 [ 2.310895] NET: Registered protocol family 17
265 [ 2.310982] Using IPI No-Shortcut mode
266 [ 2.311532] registered taskstats version 1
267 [ 2.312139] Freeing unused kernel memory: 252k freed
268 [ 2.074160] input: AT Translated Set 2 keyboard as /class/input/input0
269 [ 2.609650] ACPI: SSDT 3F5E8C90, 0253 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
270 [ 2.610803] ACPI: SSDT 3F5E7690, 0653 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
271 [ 2.618197] Monitor-Mwait will be used to enter C-1 state
272 [ 2.618210] Monitor-Mwait will be used to enter C-2 state
273 [ 2.618221] Monitor-Mwait will be used to enter C-3 state
274 [ 2.618963] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
275 [ 2.619398] ACPI: ACPI0007:00 is registered as cooling_device0
276 [ 2.619494] ACPI: Processor [CPU0] (supports 8 throttling states)
277 [ 2.620714] ACPI: SSDT 3F5E8F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
278 [ 2.621607] ACPI: SSDT 3F611B10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
279 [ 2.624174] Marking TSC unstable due to: TSC halts in idle.
280 [ 2.376419] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
281 [ 2.376860] ACPI: ACPI0007:01 is registered as cooling_device1
282 [ 2.376962] ACPI: Processor [CPU1] (supports 8 throttling states)
283 [ 2.632857] ACPI: LNXTHERM:01 is registered as thermal_zone0
284 [ 2.635116] ACPI: Thermal Zone [THRM] (49 C)
285 [ 3.170886] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
286 [ 3.171037] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
287 [ 3.171230] PCI: Setting latency timer of device 0000:01:00.0 to 64
288 [ 3.171260] r8169 0000:01:00.0: unknown MAC (37a00000)
289 [ 3.172468] eth0: RTL8169 at 0xf883c000, 00:1d:92:54:8b:4f, XID 34a00000 IRQ 221
290 [ 3.454845] usbcore: registered new interface driver usbfs
291 [ 3.455044] usbcore: registered new interface driver hub
292 [ 3.480593] usbcore: registered new device driver usb
293 [ 3.725115] No dock devices found.
294 [ 3.753248] USB Universal Host Controller Interface driver v3.0
295 [ 3.753469] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
296 [ 3.753659] PCI: Setting latency timer of device 0000:00:1d.0 to 64
297 [ 3.753677] uhci_hcd 0000:00:1d.0: UHCI Host Controller
298 [ 3.754111] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
299 [ 3.754291] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e0a0
300 [ 3.754960] usb usb1: configuration #1 chosen from 1 choice
301 [ 3.755170] hub 1-0:1.0: USB hub found
302 [ 3.755276] hub 1-0:1.0: 2 ports detected
303 [ 3.859736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
304 [ 3.859851] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
305 [ 3.859968] usb usb1: Product: UHCI Host Controller
306 [ 3.860054] usb usb1: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
307 [ 3.860144] usb usb1: SerialNumber: 0000:00:1d.0
308 [ 3.860304] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
309 [ 3.860486] PCI: Setting latency timer of device 0000:00:1d.1 to 64
310 [ 3.860503] uhci_hcd 0000:00:1d.1: UHCI Host Controller
311 [ 3.860692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
312 [ 3.860863] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e080
313 [ 3.861459] usb usb2: configuration #1 chosen from 1 choice
314 [ 3.861658] hub 2-0:1.0: USB hub found
315 [ 3.861765] hub 2-0:1.0: 2 ports detected
316 [ 3.874289] SCSI subsystem initialized
317 [ 3.967699] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
318 [ 3.967809] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
319 [ 3.967927] usb usb2: Product: UHCI Host Controller
320 [ 3.968014] usb usb2: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
321 [ 3.968104] usb usb2: SerialNumber: 0000:00:1d.1
322 [ 3.968267] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
323 [ 3.968451] PCI: Setting latency timer of device 0000:00:1d.2 to 64
324 [ 3.968466] uhci_hcd 0000:00:1d.2: UHCI Host Controller
325 [ 3.968661] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
326 [ 3.968842] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e060
327 [ 3.969433] usb usb3: configuration #1 chosen from 1 choice
328 [ 3.969632] hub 3-0:1.0: USB hub found
329 [ 3.969738] hub 3-0:1.0: 2 ports detected
330 [ 4.075741] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
331 [ 4.075853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
332 [ 4.075971] usb usb3: Product: UHCI Host Controller
333 [ 4.076057] usb usb3: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
334 [ 4.076148] usb usb3: SerialNumber: 0000:00:1d.2
335 [ 4.076307] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
336 [ 4.076488] PCI: Setting latency timer of device 0000:00:1d.3 to 64
337 [ 4.076504] uhci_hcd 0000:00:1d.3: UHCI Host Controller
338 [ 4.076697] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
339 [ 4.076875] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e040
340 [ 4.077471] usb usb4: configuration #1 chosen from 1 choice
341 [ 4.077667] hub 4-0:1.0: USB hub found
342 [ 4.077773] hub 4-0:1.0: 2 ports detected
343 [ 4.183765] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
344 [ 4.183880] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
345 [ 4.183997] usb usb4: Product: UHCI Host Controller
346 [ 4.184083] usb usb4: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
347 [ 4.184173] usb usb4: SerialNumber: 0000:00:1d.3
348 [ 4.185470] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
349 [ 4.185674] PCI: Setting latency timer of device 0000:00:1d.7 to 64
350 [ 4.185691] ehci_hcd 0000:00:1d.7: EHCI Host Controller
351 [ 4.185917] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
352 [ 4.189999] ehci_hcd 0000:00:1d.7: debug port 1
353 [ 4.190105] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
354 [ 4.190137] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40400
355 [ 4.207428] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
356 [ 4.208021] usb usb5: configuration #1 chosen from 1 choice
357 [ 4.208224] hub 5-0:1.0: USB hub found
358 [ 4.208332] hub 5-0:1.0: 8 ports detected
359 [ 4.252196] libata version 3.00 loaded.
360 [ 4.071669] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
361 [ 4.071776] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
362 [ 4.071893] usb usb5: Product: EHCI Host Controller
363 [ 4.071978] usb usb5: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
364 [ 4.072068] usb usb5: SerialNumber: 0000:00:1d.7
365 [ 4.328199] ahci 0000:00:1f.2: version 3.0
366 [ 4.328249] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
367 [ 4.312380] usb 5-6: new high speed USB device using ehci_hcd and address 2
368 [ 4.455890] usb 5-6: configuration #1 chosen from 1 choice
369 [ 4.705385] usb 5-6: New USB device found, idVendor=0bda, idProduct=0158
370 [ 4.705492] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
371 [ 4.705593] usb 5-6: Product: USB2.0-CRW
372 [ 4.706895] usb 5-6: Manufacturer: Generic
373 [ 4.706981] usb 5-6: SerialNumber: 20071114173400000
374 [ 4.651821] Initializing USB Mass Storage driver...
375 [ 4.653106] scsi0 : SCSI emulation for USB Mass Storage devices
376 [ 4.898604] usb-storage: device found at 2
377 [ 4.898616] usb-storage: waiting for device to settle before scanning
378 [ 4.654651] usbcore: registered new interface driver usb-storage
379 [ 4.654748] USB Mass Storage support registered.
380 [ 5.330514] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
381 [ 5.330637] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
382 [ 5.330728] PCI: Setting latency timer of device 0000:00:1f.2 to 64
383 [ 5.331190] scsi1 : ahci
384 [ 5.331568] scsi2 : ahci
385 [ 5.332617] scsi3 : ahci
386 [ 5.333308] scsi4 : ahci
387 [ 5.333503] ata1: SATA max UDMA/133 abar m1024@0xdff40000 port 0xdff40100 irq 220
388 [ 5.333612] ata2: DUMMY
389 [ 5.333685] ata3: SATA max UDMA/133 abar m1024@0xdff40000 port 0xdff40200 irq 220
390 [ 5.333792] ata4: DUMMY
391 [ 5.454189] Clocksource tsc unstable (delta = -491554545 ns)
392 [ 5.560040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
393 [ 5.853065] ata1.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
394 [ 5.853065] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
395 [ 5.853672] ata1.00: configured for UDMA/133
396 [ 6.160732] ata3: SATA link down (SStatus 0 SControl 300)
397 [ 5.918775] scsi 1:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
398 [ 5.988374] Driver 'sd' needs updating - please use bus_type methods
399 [ 5.991340] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
400 [ 5.991951] sd 1:0:0:0: [sda] Write Protect is off
401 [ 5.992039] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
402 [ 6.235107] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
403 [ 6.235451] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
404 [ 5.992687] sd 1:0:0:0: [sda] Write Protect is off
405 [ 5.992781] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
406 [ 5.992922] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
407 [ 5.993040] sda: sda1 sda2 sda3 < sda5 sda6 >
408 [ 6.312034] sd 1:0:0:0: [sda] Attached SCSI disk
409 [ 6.664586] PM: Starting manual resume from disk
410 [ 6.510647] kjournald starting. Commit interval 5 seconds
411 [ 6.737914] EXT3-fs: mounted filesystem with ordered data mode.
412 [ 9.812558] usb-storage: device scan complete
413 [ 9.653582] scsi 0:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
414 [ 9.884578] input: PC Speaker as /class/input/input1
415 [ 10.542716] sd 0:0:0:0: [sdb] 498176 512-byte hardware sectors (255 MB)
416 [ 10.543833] sd 0:0:0:0: [sdb] Write Protect is off
417 [ 10.543929] sd 0:0:0:0: [sdb] Mode Sense: 03 00 00 00
418 [ 10.543942] sd 0:0:0:0: [sdb] Assuming drive cache: write through
419 [ 10.546835] sd 0:0:0:0: [sdb] 498176 512-byte hardware sectors (255 MB)
420 [ 10.547957] sd 0:0:0:0: [sdb] Write Protect is off
421 [ 10.548052] sd 0:0:0:0: [sdb] Mode Sense: 03 00 00 00
422 [ 10.548065] sd 0:0:0:0: [sdb] Assuming drive cache: write through
423 [ 10.548164] sdb:<6>Real Time Clock Driver v1.12ac
424 [ 10.575397] sdb1
425 [ 10.575800] sd 0:0:0:0: [sdb] Attached SCSI removable disk
426 [ 11.242111] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
427 [ 11.242339] PCI: Setting latency timer of device 0000:00:1b.0 to 64
428 [ 11.279485] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
429 [ 11.489645] Linux agpgart interface v0.103
430 [ 11.589432] agpgart: Detected an Intel 945GME Chipset.
431 [ 11.589838] agpgart: Detected 7932K stolen memory.
432 [ 11.610279] agpgart: AGP aperture is 256M @ 0xc0000000
433 [ 12.888640] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
434 [ 12.888958] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
435 [ 12.889129] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
436 [ 13.789224] input: Power Button (FF) as /class/input/input2
437 [ 13.811434] ACPI: Power Button (FF) [PWRF]
438 [ 13.811881] input: Lid Switch as /class/input/input3
439 [ 13.846490] ACPI: Lid Switch [LID0]
440 [ 13.846948] input: Power Button (CM) as /class/input/input4
441 [ 13.871084] ACPI: Power Button (CM) [PWRB]
442 [ 13.896538] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000
443 [ 13.959760] input: SynPS/2 Synaptics TouchPad as /class/input/input5
444 [ 14.326104] intel_rng: FWH not detected
445 [ 15.524681] ACPI: AC Adapter [ADP1] (on-line)
446 [ 15.585607] ACPI: Battery Slot [BAT1] (battery absent)
447 [ 15.801604] ACPI: WMI: Mapper loaded
448 [ 15.921428] ACPI: device:1c is registered as cooling_device2
449 [ 15.922088] input: Video Bus as /class/input/input6
450 [ 16.086732] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
451 [ 16.086860] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
452 [ 16.090397] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
453 [ 16.090522] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
454 [ 15.955474] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
455 [ 17.722683] Adding 1951824k swap on /dev/sda5. Priority:-1 extents:1 across:1951824k
456 [ 18.190832] EXT3 FS on sda1, internal journal
457 [ 18.739962] loop: module loaded
458 [ 19.479439] kjournald starting. Commit interval 5 seconds
459 [ 19.549638] EXT3 FS on sda6, internal journal
460 [ 19.549638] EXT3-fs: mounted filesystem with ordered data mode.
Attached Files
To refer to attachments on a page, use attachment:filename, as shown below in the list of files. Do NOT use the URL of the [get] link, since this is subject to change and can break easily.You are not allowed to attach a file to this page.